пытаюсь поиграться с ESP32, в статье взял пример, пытаюсь залить, но получаю в консоли ардуино студии
причем процент окончания всегда разный, предполагаю что скорость великовата, хочу попробовать изменить скорость порта, не подскажете где это делается?esptool.py v2.6
Serial port /dev/ttyUSB0
Connecting....
Chip is ESP32D0WDQ5 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
MAC: 30:ae:a4:d4:d1:24
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 460800
Changed.
Configuring flash size...
Auto-detected Flash size: 4MB
Compressed 8192 bytes to 47...
Writing at 0x0000e000... (100 %)
Wrote 8192 bytes (47 compressed) at 0x0000e000 in 0.0 seconds (effective 4094.1 kbit/s)...
Hash of data verified.
Compressed 17392 bytes to 11186...
Writing at 0x00001000... (100 %)
Wrote 17392 bytes (11186 compressed) at 0x00001000 in 0.3 seconds (effective 543.5 kbit/s)...
Hash of data verified.
Compressed 770624 bytes to 443501...
Writing at 0x00010000... (3 %)
Writing at 0x00014000... (7 %)
Writing at 0x00018000... (10 %)
Writing at 0x0001c000... (14 %)
Writing at 0x00020000... (17 %)
Writing at 0x00024000... (21 %)
Writing at 0x00028000... (25 %)
Writing at 0x0002c000... (28 %)
Writing at 0x00030000... (32 %)
Writing at 0x00034000... (35 %)
Writing at 0x00038000... (39 %)
Writing at 0x0003c000... (42 %)
Writing at 0x00040000... (46 %)
Writing at 0x00044000... (50 %)
Writing at 0x00048000... (53 %)
Writing at 0x0004c000... (57 %)
Writing at 0x00050000... (60 %)
A fatal error occurred: Timed out waiting for packet header
A fatal error occurred: Timed out waiting for packet header